We’re on the Cutting Hedge.5% off for pensioners07763 100 477 · hello@littlebournehedges.co.uk
Littlebourne Hedges & Tree ServicesLittle Stour Valley

← All guides · Trees · Updated November 2026

Tree deadwooding in Littlebourne: the decision route.

A branch has stopped leafing up. It snaps dry rather than bending. You want to know whether to have it removed, when to have it done, and whether the law requires any paperwork first. The answer involves four decisions, not one.

Step 1: is the branch actually dead?

No leaves at all in the growing season, bark peeling or already missing, wood dry and brittle under the bark → dead. The scratch test confirms it: use a penknife to scrape a 10mm strip of bark. Green or white cambium underneath means live; dry brown tissue means dead. A dead branch can be removed at any time. Go to Step 2.

Branch looks sparse or sickly but still carries some leaves, or has wilted rather than dried out → this is probably dieback from disease, root stress or drought rather than a branch that has simply died. It is still a matter for a tree assessment, but the right question changes: you may be looking at a symptom of a wider health problem rather than an isolated dead branch. See the tree pruning decisions guide for the broader picture and what to do when multiple branches are affected at once.

Branch is freshly broken or split in a storm → treat as an urgent hazard regardless of whether it is fully dead yet. The structural failure makes it unpredictable. Go directly to Step 2.

Step 2: does the deadwood present a fall hazard?

Large branch (thicker than your upper arm), or any dead branch positioned over a path, roof, outbuilding, parked vehicle or any area where people regularly stand → remove it. The risk justifies removal regardless of the tree's protection status, and both the TPO exemption and the conservation-area exemption for dead and dangerous branches are designed for exactly this situation. Go to Step 4 to check what notification, if any, is needed before the work starts.

Small to medium dead branch well clear of any path, structure or area people use regularly → the urgency is lower. How much wildlife value the dead wood carries is the deciding question before you book anyone. Go to Step 3.

Large section of stem dieback from a fork in the main trunk, a visible crack in the main stem, or any dead material in the upper canopy of a tree you cannot safely assess from the ground → arborist inspection before any work. Standing deadwood in the upper crown of a garden tree is structurally unpredictable, particularly after a wet summer like those the Little Stour valley sees most years. Phone or email us for an assessment; we cover Littlebourne, Wickhambreaux, Ickham, Bekesbourne, Patrixbourne and Bridge.

Step 3: is there any wildlife value in retaining the deadwood?

Dead twigs, minor branches or limited dieback inside the crown of a mature or veteran tree, with nothing positioned over a path or structure → leave it. Dead wood inside a live tree crown is habitat, not a problem. Many species of bark beetle, hoverfly and wood-boring insect depend on dead branches in otherwise live trees. Deadwooding every dead twig in a mature oak tidies nothing and removes habitat that takes decades to re-establish.

Standing dead stub or hollow branch you cannot see clearly into → possible bat roost or nesting cavity. Under the Conservation of Habitats and Species Regulations 2017, bats and their roosts are protected year-round, with no seasonal exemption. If there is any realistic possibility of a roost, a licensed bat surveyor must assess the branch before any removal takes place, whatever the time of year. We can arrange this as part of the job.

Large dead branch on a mature tree that is away from people but you still want some action taken → consider a standing stub ("monolith") rather than a full removal. The branch is cut back to a safe length, leaving a standing section that continues to provide deadwood habitat while eliminating the fall risk of a long, unsupported dead limb. This is consistent with current BS 3998:2010 guidance on retaining dead wood where it is safe to do so.

Dead branch on a younger or smaller garden tree with no particular veteran character → standard removal is appropriate. Go to Step 4.

Step 4: does the tree have any legal protection?

Tree protected by a Tree Preservation Order (TPO) in Canterbury City Council’s area → deadwooding dead or dying branches is exempt under the Town and Country Planning (Tree Preservation) (England) Regulations 2012, but the exemption is narrowly drawn. It covers removal of genuinely dead or dying wood only; any cut into live material, or any work beyond what is necessary to remove the dead branch, still requires a formal application to Canterbury City Council. As good practice, we notify Canterbury City Council before starting deadwooding work on any TPO-protected tree and confirm the exemption applies in writing. We carry out the TPO register check as part of every tree-work quote.

Tree in Littlebourne’s conservation area, or within a neighbouring village’s conservation-area boundary, where the stem exceeds 75 mm diameter at 1.5 m height → six weeks’ written notice to Canterbury City Council is required under section 211 of the Town and Country Planning Act 1990 before any work on a qualifying tree, with a limited exception for trees that are dead or present an immediate risk to safety. We file this notice on your behalf as part of every quote for conservation-area tree work. The full process, including what qualifies as an emergency exception, is in our guide to tree work in the conservation area.

No TPO and no conservation-area designation → no planning or notice requirement applies. The nesting check in Step 5 still applies to any work that removes adjacent live material, however minor, alongside the dead branch.

Step 5: when should the work happen, and does the nesting-season rule apply?

Removing purely dead branches with no work on live material → dead wood can technically be removed at any time of year. The nesting-season restriction under section 1 of the Wildlife and Countryside Act 1981 applies to damage of occupied nests; dead branches alone are not covered. In practice, however, the cutting work can disturb active nests in adjacent live branches, forks or cavities immediately next to the dead wood. A visual check by a competent person immediately before any cutting begins is what we carry out as standard, whatever the time of year.

Work between 1 March and 31 August → inside the main nesting season. Even where only dead wood is being removed, the visual check immediately before cutting is not optional. If any adjacent live material needs to come out alongside the dead branch, the full nesting-season check applies: a competent assessment must confirm no active nests in or immediately around the work area before any cutting starts. See the nesting-season decision route for the full sequence.

November to February, winter dormancy → the preferred practical window for large deadwooding jobs. The tree is dormant, the branch structure is fully visible without foliage, and dead wood is easy to distinguish from live. Any cavities or hollow branches associated with the deadwood are also more visible in winter, making it easier to assess bat-roost risk before cutting begins. For most Littlebourne garden trees, this is the window where scope can be agreed and work carried out most efficiently.

Bat roost suspected at any time of year → no season is safe for removal without survey. Contact a licensed bat surveyor before any work proceeds.

Not sure whether the branch needs to come out, or what permissions are needed first?

Call 07763 100 477 or email hello@littlebournehedges.co.uk with a description of the tree and your postcode. We carry out the TPO and conservation-area check as part of every quote, can arrange a bat survey where needed, and include a nest check before any cutting begins.

For the full picture of which tree operation suits which problem, including when crown reduction, crown thinning or crown lifting is needed alongside or instead of deadwooding, see the tree pruning decisions guide.

If the tree also overhangs a neighbour or sits in a conservation area, the planning and notice process is covered in the guide to tree work in the conservation area and the crown reduction decision route.

If the tree is an ash and symptoms match wilted shoot tips, blackened leaf bases or bark lesions spreading from the crown downwards, see the ash dieback decision route for the specific decisions the disease raises, including whether a TPO application is needed before felling and what species to plant as a replacement.

Sources: BS 3998:2010 Tree work: Recommendations, British Standards Institution; Wildlife and Countryside Act 1981, section 1; Town and Country Planning Act 1990, section 211; Conservation of Habitats and Species Regulations 2017; RHS – Pruning trees; Woodland Trust – Deadwood habitat.